Top Decile Publications

    1. McNamara, K; Beloshapkin, S; Hossain, KM; Dhoubhadel, MS; Tofail, SAM “Tantalum coating inhibits Ni-Migration from Titanium out-diffusion in NiTi Shape Memory Biomedical Alloy” DOI:10.1016/j.apsusc.2020.147621  Applied Surface Science 535:147621
    2. Vivek V.RanadeacVarahaPrasad SarvothamanaAlisterSimpsonbSanjayNagarajanaMultiphase Reactors, Intensification Group (mRING) “Scale-up of vortex based hydrodynamic cavitation devices: A case of degradation of di-chloro aniline in water” doi.org/10.1016/j.ultsonch.2020.105295
    3. Patil, PB; Bhandari, VM; Ranade, VV “Improving efficiency for removal of ammoniacal nitrogen from wastewaters using hydrodynamic cavitation” doi.org/10.1016/j.ultsonch.2020.105306
    4. Kadiyala, AK; Portela, A; Devlin, K; Lee, S; O’Carroll, A; Jones, D; Comer, A “Mechanical evaluation and failure analysis of composite laminates manufactured using automated dry fibre tape placement followed by liquid resin infusion” doi.org/10.1016/j.compscitech.2020.108512
    5. Abril-Parreno, L; Krogenaes, AK; Byrne, CJ; Donovan, A; Stuen, S; Caldas, E; Diskin, M; Druart, X; Fair, S “Ewe breed differences in cervical anatomy and cervicovaginal mucus properties: An international study” doi.org/10.1016/j.theriogenology.2020.10.038
    6. Masjedi, PK; Weaver, PM “Variable stiffness composite beams subject to non-uniformly distributed loads: An analytical solution” doi.org/10.1016/j.compstruct.2020.112975
    7. Hadjimichael, M; Li, YQ; Zatterin, E; Chahine, GA; Conroy, M; Moore, K; O’ Connell, EN; Ondrejkovic, P; Marton, P; Hlinka, J; Bangert, U; Leake, S; Zubko, P “Metal-ferroelectric supercrystals with periodically curved metallic layers” doi.org/10.1038/s41563-020-00864-6
    8. Kurniawan, TA; Avtar, R; Singh, D; Xue, WC; Othman, MHD; Hwang, GH; Iswanto, I; Albadarin, AB; Kern, AO “Reforming MSWM in Sukunan (Yogjakarta, Indonesia): “A case-study of applying a zero-waste approach based on circular economy paradigm” doi.org/10.1016/j.jclepro.2020.124775
    9. Kumar, KV; Gadipelli, S; Howard, CA; Kwapinski, W; Brett, DJL “Probing adsorbent heterogeneity using Toth isotherms”
    10. Kilian, S; McCarthy, K; Stokes, K; Adegoke, TE; Conroy, M; Amiinu, IS; Geaney, H; Kennedy, T; Ryan, KM “Direct Growth of Si, Ge, and Si-Ge Heterostructure Nanowires Using Electroplated Zn: An Inexpensive Seeding Technique for Li-Ion Alloying Anodes”  doi.org/10.1002/smll.202005443
    11. Ansari, QM; Zucco, G; Trinh, LC; Weaver, PM “Design considerations for composite cylindrical shells on elastic foundations subject to compression buckling” doi.org/10.1016/j.compstruct.2020.113176
    12. Hinchy, EP; Barron, D; Pomeroy, MJ; Tanner, DA “Diffusion braze homogenisation and contraction during re-repair heat treatments of a single crystal nickel-based superalloydoi.org/10.1016/j.jallcom.2020.157560
    13. Grabrucker, S; Pagano, J; Schweizer, J; Urrutia-Ruiz, C; Schon, M; Thome, K; Ehret, G; Grabrucker, AM; Zhang, R; Hengerer, B; Bockmann, J; Verpelli, C; Sala, C; Boeckers, TM “Activation of the medial preoptic area (MPOA) ameliorates loss of maternal behavior in a Shank2 mouse model for autism”https://www.embopress.org/doi/full/10.15252/embj.2019104267 doi.org/10.15252/embj.2019104267
    14. Magalhaes, D; Gurel, K; Matsakas, L; Christakopoulos, P; Pisano, I; Leahy, JJ; Kazanc, F; Trubetskaya, A “Prediction of yields and composition of char from fast pyrolysis of commercial lignocellulosic materials, organosolv fractionated and torrefied olive stones” doi.org/10.1016/j.fuel.2020.119862
    15. Aramouni, NAK; Zeaiter, J; Kwapinski, W; Leahy, JJ; Ahmad, MN “Molybdenum and nickel-molybdenum nitride catalysts supported on MgO-Al2O3 for the dry reforming of methane” doi.org/10.1016/j.jcou.2020.101411
    16. Zhu, BY; Cao, JW; Mukherjee, S; Pham, T; Zhang, T; Wang, T; Jiang, X; Forrest, KA; Zaworotko, MJ; Chen, KJ “Pore Engineering for One-Step Ethylene Purification from a Three-Component Hydrocarbon Mixture” doi.org/10.1021/jacs.0c11247
    17. Redfern, S; Dermiki, M; Fox, S; Lordan, R; Shiels, K; Saha, SK; Tsoupras, A; Zabetakis, I “The effects of cooking salmon sous-vide on its antithrombotic properties, lipid profile and sensory characteristics” doi.org/10.1016/j.foodres.2020.109976
    18. Peng, YL; Wang, T; Jin, CN; Li, PF; Suepaul, S; Beemer, G; Chen, Y; Krishna, R; Cheng, P; Pham, T; Space, B; Zaworotko, MJ; Zhang, ZJ “A robust heterometallic ultramicroporous MOF with ultrahigh selectivity for propyne/propylene separation”  /doi.org/10.1039/D0TA08498K
    19. Agius, D; Wallbrink, C; Kourousis, KI “Efficient modelling of the elastoplastic anisotropy of additively manufactured Ti-6Al-4V” doi.org/10.1016/j.addma.2020.101826
    20. Cunnane, EM; Davis, NF; Cunnane, CV; Lorentz, KL; Ryan, AJ; Hess, J; Weinbaum, JS; Walsh, MT; O’Brien, FJ; Vorp, DA “Mechanical, compositional and morphological characterisation of the human male urethra for the development of a biomimetic tissue engineered urethral scaffold” doi.org/10.1016/j.biomaterials.2021.120651
    21. Lincoln, RL; Weaver, PM; Pirrera, A; Groh, RMJ “Imperfection-insensitive continuous tow-sheared cylinders” doi.org/10.1016/j.compstruct.2020.113445
    22. Hassan, J; O’Higgins, RM; Feser, T; Waimer, M; McCarthy, CT; Toso, N; McCarthy, MA “Influence of layup, stacking sequence and loading rate on energy absorption of tension-absorber joints”  doi.org/10.1016/j.compstruct.2020.113327
    23. Culebras, M; Barrett, A; Pishnamazi, M; Walker, GM; Collins, MN “Wood-Derived Hydrogels as a Platform for Drug-Release Systems” doi.org/10.1021/acssuschemeng.0c08022
    24. Ramaswamy, K; O’Higgins, RM; Lyons, J; McCarthy, MA; McCarthy, CT “An evaluation of the influence of manufacturing methods on interlocked aluminium-thermoplastic composite joint performancedoi.org/10.1016/j.compositesa.2021.106281
    25. Pimentel, FB; Machado, M; Cermeno, M; Kleekayai, T; Machado, S; Rego, AM; Abreu, MH; Alves, RC; Oliveira, MBPP; FitzGerald, RJ “Enzyme-Assisted Release of Antioxidant Peptides from Porphyra dioica Conchocelis”/doi.org/10.3390/antiox10020249
    26. Nikkhah, SJ; Thompson, D “Molecular Modelling Guided Modulation of Molecular Shape and Charge for Design of Smart Self-Assembled Polymeric Drug Transporters” doi.org/10.3390/pharmaceutics13020141
    27. Thodkar, K; Cazade, PA; Bergmann, F; Lopez-Calle, E; Thompson, D; Heindl, D “Self-Assembled Pyrene Stacks and Peptide Monolayers Tune the Electronic Properties of Functionalized Electrolyte-Gated Graphene Field-Effect Transistors” doi.org/10.1021/acsami.0c18485
    28. Collins, MN; Ren, G; Young, K; Pina, S; Reis, RL; Oliveira, JM “Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering”  doi.org/10.1002/adfm.202010609
    29. O’Hearn, DJ; Bajpai, A; Zaworotko, MJ “The “Chemistree” of Porous Coordination Networks: Taxonomic Classification of Porous Solids to Guide Crystal Engineering Studies” doi.org/10.1002/smll.202006351
    30. Ghadiri, M; Marjani, A; Daneshfar, R; Shirazian, S “Model order reduction of a reservoir simulation by SOD-DEIM” doi.org/10.1016/j.petrol.2020.108137
    31. Ji, W; Xue, B; Bera, S; Guerin, S; Shimon, LJW; Ma, Q; Tofail, SAM; Thompson, D; Cao, Y; Wang, W; Gazit, E “Modulation of physical properties of organic cocrystals by amino acid chirality” doi.org/10.1016/j.mattod.2020.10.007
    32. McCallum, CS; Wang, WL; Doran, WJ; Forsythe, WG; Garrett, MD; Hardacre, C; Leahy, JJ; Morgan, K; Shin, DS; Sheldrake, GN “Life cycle thinking case study for catalytic wet air oxidation of lignin in bamboo biomass for vanillin production” doi.org/10.1039/D0GC03685D
    33. Guy, JGM; Cochard, C; Aguado-Puente, P; Soergel, E; Whatmore, RW; Conroy, M; Moore, K; Courtney, E; Harvey, A; Bangert, U; Kumar, A; McQuaid, RGP; Gregg, JM “Anomalous Motion of Charged Domain Walls and Associated Negative Capacitance in Copper-Chlorine Boracite”  doi.org/10.1002/adma.202008068
    34. Meade, ED; Sun, FW; Tiernan, P; O’Dowd, NP “A multiscale experimentally-based finite element model to predict microstructure and damage evolution in martensitic steels/doi.org/10.1016/j.ijplas.2021.102966
    35. Daghighi, S; Weaver, PM “Three-dimensional effects influencing failure in bend-free, variable stiffness composite pressure vessels” doi.org/10.1016/j.compstruct.2020.113346
    36. Rotter, A; Barbier, M; Bertoni, F; Bones, AM; Cancela, ML; Carlsson, J; Carvalho, MF; Ceglowska, M; Chirivella-Martorell, J; Dalay, MC; Cueto, M; Dailianis, T; Deniz, I; Diaz-Marrero, AR; Drakulovic, D; Dubnika, A; Edwards, C; Einarsson, H; Erdogan, A; Eroldogan, OT; Ezra, D; Fazi, S; FitzGerald, RJ; Gargan, LM; Gaudencio, SP; Udovic, MG; DeNardis, NI; Jonsdottir, R; Katarzyte, M; Klun, K; Kotta, J; Ktari, L; Ljubesic, Z; Bilela, LL; Mandalakis, M; Massa-Gallucci, A; Matijosyte, I; Mazur-Marzec, H; Mehiri, M; Nielsen, SL; Novoveska, L; Overlinge, D; Perale, G; Ramasamy, P; Rebours, C; Reinsch, T; Reyes, F; Rinkevich, B; Robbens, J; Rottinger, E; Rudovica, V; Sabotid, J; Safarik, I; Talve, S; Tasdemir, D; Schneider, XT; Thomas, OP; Torunska-Sitarz, A; Varese, GC; Vasquez, MI “The Essentials of Marine Biotechnology” doi.org/10.3389/fmars.2021.629629
    37. Butler, C; Babu, S; Lundy, R; Meehan, RO; Punch, J; Jeffers, N “Effects of processing parameters and heat treatment on thermal conductivity of additively manufactured AlSi10Mg by selective laser melting” doi.org/10.1016/j.matchar.2021.110945
    38. Zamboni, F; Okoroafor, C; Ryan, MP; Pembroke, JT; Strozyk, M; Culebras, M; Collins, MN “On the bacteriostatic activity of hyaluronic acid composite films” doi.org/10.1016/j.carbpol.2021.117803
    39. Ranade, NV; Nagarajan, S; Sarvothaman, V; Ranade, VV “ANN based modelling of hydrodynamic cavitation processes: Biomass pre-treatment and wastewater treatment” doi.org/10.1016/j.ultsonch.2020.105428
    40. Mukherjee, S; Kumar, N; Bezrukov, AA; Tan, K; Pham, T; Forrest, KA; Oyekan, KA; Qazvini, OT; Madden, DG; Space, B; Zaworotko, MJ “Amino-Functionalised Hybrid Ultramicroporous Materials that Enable Single-Step Ethylene Purification from a Ternary Mixture” doi.org/10.1002/anie.202100240
    41. Klionsky, DJ; Abdel-Aziz, AK; Abdelfatah, S; Abdellatif, M; Abdoli, A; Abel, S; Abeliovich, H; Abildgaard, MH; Abudu, YP; Acevedo-Arozena, A; Adamopoulos, IE; Adeli, K; Adolph, TE; Adornetto, A; Aflaki, E; Agam, G; Agarwal, A; Aggarwal, BB; Agnello, M; Agostinis, P; “Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)” doi.org/10.1080/15548627.2020.1797280
    42. Pelalak, R; Heidari, Z; Alizadeh, R; Ghareshabani, E; Nasseh, N; Marjani, A; Albadarin, AB; Shirazian, S “Efficient oxidation/mineralization of pharmaceutical pollutants using a novel Iron (III) oxyhydroxide nanostructure prepared via plasma technology: Experimental, modeling and DFT studies” doi.org/10.1016/j.jhazmat.2021.125074
    43. Decante, G; Costa, JB; Silva-Correia, J; Collins, MN; Reis, RL; Oliveira, JM “Engineering bioinks for 3D bioprinting”  doi: 10.1088/1758-5090/abec2c
    44. Akbari, N; Kondov, I; Vandichel, M; Aleshkevych, P; Najafpour, MM “Oxygen-Evolution Reaction by a Palladium Foil in the Presence of Iron” doi.org/10.1021/acs.inorgchem.0c03746
    45. Singh, S; Leemans, J; Zaccaria, F; Infante, I; Hens, Z “Ligand Adsorption Energy and the Postpurification Surface Chemistry of Colloidal Metal Chalcogenide Nanocrystals” doi.org/10.1021/acs.chemmater.0c04761
    46. Just, J; Coughlan, C; Singh, S; Ren, H; Muller, O; Becker, P; Unold, T; Ryan, KM “Insights into Nucleation and Growth of Colloidal Quaternary Nanocrystals by Multimodal X-ray Analysis”  doi.org/10.1021/acsnano.0c08617
    47. Donnell, JO; Cazade, PA; Guerin, S; Djeghader, A; Haq, EU; Tao, K; Gazit, E; Fukada, E; Silien, C; Soulimane, T; Thompson, D; Tofail, SAM “Piezoelectricity of the Transmembrane Protein ba(3) Cytochrome c Oxidase” doi.org/10.1002/adfm.202100884
    48. McHale, C; Carey, S; Hadjiloizi, DA; Weaver, PM “Thermal stresses in composite cylindrical lattices” doi.org/10.1016/j.compstruct.2021.113747
    49. Castellanos, DB; Martin-Jimenez, CA; Rojas-Rodriguez, F; Barreto, GE; Gonzalez, J “Brain lipidomics as a rising field in neurodegenerative contexts: Perspectives with Machine Learning approaches” doi.org/10.1016/j.yfrne.2021.100899
    50. Trubetskaya, A; Johnson, R; Monaghan, RFD; Ramos, AS; Brunsvik, A; Wittgens, B; Han, YL; Pisano, I; Leahy, JJ; Budarin, V “Combined analytical strategies for chemical and physical characterization of tar from torrefaction of olive stone”  doi.org/10.1016/j.fuel.2020.120086
    51. Horvat, A; Kwapinska, M; Aramouni, NAK; Leahy, JJ “Solid phase adsorption method for tar sampling-How post sampling treatment affects tar yields and volatile tar compounds?” doi.org/10.1016/j.fuel.2020.120059
    52. O’Callaghan, E; Sanchez, JM; McDonald, M; Kelly, AK; Hamdi, M; Maicas, C; Fair, S; Kenny, DA; Lonergan, P “Sire contribution to fertilization failure and early embryo survival in cattle” /doi.org/10.3168/jds.2020-19900
    53. Sohrabpoor, H; Salarvand, V; Lupoi, R; Chu, Q; Li, W; Aldwell, B; Stanley, W; O’Halloran, S; Raghavendra, R; Choi, CH; Brabazon, D “Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion”  doi.org/10.1016/j.jmrt.2021.02.090
    54. Bowen, AG; Zucco, G; Weaver, PM “Flexible hinges in orthotropic cylindrical shells facilitated by nonlinear elastic deformations”  doi.org/10.1016/j.compstruct.2021.113726
    55. Geiregat, P; Roda, C; Tanghe, I; Singh, S; Di Giacomo, A; Lebrun, D; Grimaldi, G; Maes, J; Van Thourhout, D; Moreels, I; Houtepen, AJ; Hens, Z “Localization-limited exciton oscillator strength in colloidal CdSe nanoplatelets revealed by the optically induced stark effect”doi.org/10.1038/s41377-021-00548-z 
    56. Ferreira, APA; Casamento, A; Roas, SC; Halff, EF; Panambalana, J; Subramaniam, S; Schutzenhofer, K; Hak, LCW; McGourty, K; Thalassinos, K; Kittler, JT; Martinvalet, D; Boucrot, E “Cdk5 and GSK3 beta inhibit fast endophilin-mediated endocytosis” doi.org/10.1038/s41467-021-22603-4
    57. Wang, SQ; Meng, XQ; Vandichel, M; Darwish, S; Chang, Z; Bu, XH; Zaworotko, MJ “High Working Capacity Acetylene Storage at Ambient Temperature Enabled by a Switching Adsorbent Layered Material” doi.org/10.1021/acsami.1c06241
    58. Yang, MF; Wang, SQ; Liu, ZY; Chen, Y; Zaworotko, MJ; Cheng, P; Ma, JG; Zhang, ZJ “Fabrication of Moisture-Responsive Crystalline Smart Materials for Water Harvesting and Electricity Transduction” doi.org/10.1021/jacs.1c01831
    59. Bera, S; Guerin, S; Yuan, H; O’Donnell, J; Reynolds, NP; Maraba, O; Ji, W; Shimon, LJW; Cazade, PA; Tofail, SAM; Thompson, D; Yang, RS; Gazit, E “Molecular engineering of piezoelectricity in collagen-mimicking peptide assemblies” doi.org/10.1038/s41467-021-22895-6
    60. Aramouni, NAK; Zeaiter, J; Kwapinski, W; Leahy, JJ; Ahmad, MN “Trimetallic Ni-Co-Ru catalyst for the dry reforming of methane: Effect of the Ni/Co ratio and the calcination temperature”  doi.org/10.1016/j.fuel.2021.120950
    61. Morgan-Davies, C; Kyle, J; Boman, IA; Wishart, H; McLaren, A; Fair, S; Creighton, P “A comparison of farm labour, profitability, and carbon footprint of different management strategies in Northern European grassland sheep systems” doi.org/10.1016/j.agsy.2021.103155
    62. Collins, GA; Geaney, H; Ryan, KM “Alternative anodes for low temperature lithium-ion batteries”
    63. Sciascia, G; Oliveri, V; Weaver, PM “Eigenfrequencies of prestressed variable stiffness composite shells” doi.org/10.1016/j.compstruct.2021.114019
    64. Mouchard, A; Pomeroy, M; Robinson, J; McAuliffe, B; Donovan, S; Tanner, D “An analytical method for powder flow characterisation in direct energy depositiondoi.org/10.1016/j.addma.2021.101991
    65. Ralph, C; Dahale, M; Neale, G; Ramaswamy, K; McCarthy, M; Yoo, S; Toso, N; Kelly, J; McGarrigle, C; Archer, E; Harkin-Jones, E; McIlhagger, A “Influence of binder float length on the out-of-plane and axial impact performance of 3D woven composites” doi.org/10.1016/j.compositesa.2021.106459
    66. Geng, SB; Lin, E; Li, X; Liu, WS; Wang, T; Wang, ZF; Sensharma, D; Darwish, S; Andaloussi, YH; Pham, T; Cheng, P; Zaworotko, MJ; Chen, Y; Zhang, ZJ “Scalable Room-Temperature Synthesis of Highly Robust Ethane-Selective Metal-Organic Frameworks for Efficient Ethylene Purification” doi.org/10.1021/jacs.1c02108
    67. Chen, XP; Kretz, B; Adoah, F; Nickle, C; Chi, X; Yu, XJ; del Barco, E; Thompson, D; Egger, DA; Nijhuis, CA “A single atom change turns insulating saturated wires into molecular conductorsdoi.org/10.1038/s41467-021-23528-8
    68. Robayo-Molina, I; Molina-Osorio, AF; Guinane, L; Tofail, SAM; Scanlon, MD “Pathway Complexity in Supramolecular Porphyrin Self-Assembly at an Immiscible Liquid-Liquid Interface” doi.org/10.1021/jacs.1c02481
    69. Forster, EJ; Healey, JR; Dymond, C; Styles, D “Commercial afforestation can deliver effective climate change mitigation under multiple decarbonisation pathways” doi.org/10.1038/s41467-021-24084-x
    70. Tajbakhsh, A; Hayat, SMG; Movahedpour, A; Savardashtaki, A; Loveless, R; Barreto, GE; Teng, Y; Sahebkar, A “The complex roles of efferocytosis in cancer development, metastasis, and treatment”  doi.org/10.1016/j.biopha.2021.111776
    71. McGovern, AJ; Barreto, GE “Network pharmacology identifies IL6 as an important hub and target of tibolone for drug repurposing in traumatic brain injury” doi.org/10.1016/j.biopha.2021.111769
    72. Collins, GA; Kilian, S; Geaney, H; Ryan, KM “A Nanowire Nest Structure Comprising Copper Silicide and Silicon Nanowires for Lithium-Ion Battery Anodes with High Areal Loading”  doi.org/10.1002/smll.202102333
    73. Beaucamp, A; Culebras, M; Collins, MN “Sustainable mesoporous carbon nanostructures derived from lignin for early detection of glucosedoi.org/10.1039/D1GC02062E
    74. Nagarajan, S; Sarvothaman, VP; Knorich, M; Ranade, VV “A simplified model for simulating anaerobic digesters: Application to valorisation of bagasse and distillery spent wash” doi.org/10.1016/j.biortech.2021.125395
    75. Sharma, S; Mukherjee, S; Desai, AV; Vandichel, M; Dam, GK; Jadhav, A; Kociok-Kohn, G; Zaworotko, MJ; Ghosh, SK “Efficient Capture of Trace Acetylene by an Ultramicroporous Metal-Organic Framework with Purine Binding Sites” doi.org/10.1021/acs.chemmater.1c01723
    76. Ojo, SO; Weaver, PM “Efficient strong Unified Formulation for stress analysis of non-prismatic beam structures” doi.org/10.1021/acs.chemmater.1c01723
    77. Shivanna, M; Otake, KI; Song, BQ; van Wyk, LM; Yang, QY; Kumar, N; Feldmann, WK; Pham, T; Suepaul, S; Space, B; Barbour, LJ; Kitagawa, S; Zaworotko, MJ “Benchmark Acetylene Binding Affinity and Separation through Induced Fit in a Flexible Hybrid Ultramicroporous Material” doi.org/10.1002/anie.202106263
    78. Khalesi, M; FitzGerald, RJ “Investigation of the flowability, thermal stability and emulsification properties of two milk protein concentrates having different levels of native whey proteins” doi.org/10.1016/j.foodres.2021.110576
    79. Gobikannan, T; Portela, A; Haldar, AK; Nash, NH; Bachour, C; Manolakis, I; Comer, AJ “Flexural properties and failure mechanisms of infusible thermoplastic-and thermosetting based composite materials for marine applications” doi.org/10.1016/j.compstruct.2021.114276
    80. Pandit, AV; Sarvothaman, VP; Ranade, V V “Estimation of chemical and physical effects of cavitation by analysis of cavitating single bubble dynamics” doi.org/10.1016/j.ultsonch.2021.105677
    81. Shi, W; Healy, MG; Ashekuzzaman, SM; Daly, K; Leahy, JJ; Fenton, O “Dairy processing sludge and co-products: A review of present and future re-use pathways in agriculture” doi.org/10.1016/j.jclepro.2021.128035
    82. Jedrzejczak, P; Collins, MN; Jesionowski, T; Klapiszewski, L “The role of lignin and lignin-based materials in sustainable construction-A comprehensive review” doi.org/10.1016/j.ijbiomac.2021.07.125
    83. Goswami, S; Pramanick, R; Patra, A; Rath, SP; Foltin, M; Ariando, A; Thompson, D; Venkatesan, T; Goswami, S; Williams, RS “Decision trees within a molecular memristor”doi.org/10.1038/s41586-021-03748-0
    84. Pisano, I; Gottumukkala, L; Hayes, DJ; Leahy, JJ “Characterisation of Italian and Dutch forestry and agricultural residues for the applicability in the bio-based sector” doi.org/10.1016/j.indcrop.2021.113857
    85. Chowdhury, IR; O’Dowd, NP; Comer, AJ “Experimental study of hygrothermal ageing effects on failure modes of non-crimp basalt fibre-reinforced epoxy composite” doi.org/10.1016/j.compstruct.2021.114415